PUBLICATIONS
Total Publications
1342026
- JMRT
acceptedJournal of Materials Research and Technology, in press, 2026 - JMRT
acceptedJournal of Materials Research and Technology, in press, 2026 - MMI
acceptedMetals and Materials International, in press, 2026 - MMI
acceptedMetals and Materials International, in press, 2026 - JMA
Validating the athermal contribution of electropulsing treatment utilizing T-type Mg specimenJournal of Magnesium and Alloys, in press, 2026
2025
- JMA
Effect of Al content on the microstructural characteristics and tensile and fatigue properties of extruded SEN Mg alloysJournal of Magnesium and Alloys, vol. 13, no. 12, pp. 6136-6153, 2025 - KSTP-TMP
Normalizing Design to Control Ferrite/Pearlite Band Structure and Optimize Mechanical Properties of S355NL Steel for Offshore Wind Power GenerationTransactions of Materials Processing, vol. 34, no. 6, pp. 316-321, 2025 - JMRT
Advancing constitutive analysis of the hot deformation behavior of Ti–3Al–8V–6Cr–4Mo–4Zr via physics-aided machine learningJournal of Materials Research and Technology, vol. 39, pp. 5487-5498, 2025 - JMRT
Grain refinement and mechanical enhancement in high-speed-extruded Mg–5Bi–3Al Alloy via Si microalloyingJournal of Materials Research and Technology, vol. 39, pp. 3206-3214, 2025 - JMA
Influence of initial texture on twinning and slip behaviors in rolled AZ31 magnesium alloy during three-point bending deformationJournal of Magnesium and Alloys, vol. 13, no. 10, pp. 5166-5183, 2025 - JMA
Effect of Al addition on microstructure, texture evolution and mechanical properties of Mg-1Zn-1Y-0.1Mn alloy sheetsJournal of Magnesium and Alloys, vol. 13, no. 7, pp. 3066-3080, 2025 - JMA
Comparative study of dynamic recrystallization behavior, microstructural characteristics, and mechanical properties of high-speed-extruded AZ31 and BA56 magnesium alloysJournal of Magnesium and Alloys, vol. 13, no. 7, pp. 3004-3019, 2025 - KSTP-TMP
Application of Multi-objective Optimization to Direct Energy Deposition of IN625Transactions of Materials Processing, vol. 34, no. 2, pp. 105-110, 2025 - MMI
Role of Y in High-Strength Mg–Y–Cu–Ni Alloy System with Long-Period Stacking Ordered PhaseMetals and Materials International, vol. 31, no. 4, pp. 936-944, 2025 - MMI
Role of Double Quenching and Tempering in Improving the Low-Temperature Impact Toughness of SA350 LF3 SteelMetals and Materials International, vol. 31, no. 9, pp. 2569-2577, 2025 - IJASS
Numerical Study on the Dynamic Behavior of Layered Structures under High-Velocity ImpactInternational Journal of Aeronautical and Space Sciences, vol. 26, pp. 97-107, 2025
2024
- JMA
Alternative predictive approach for low-cycle fatigue life based on machine learning and energy-based modelingJournal of Magnesium and Alloys, vol. 12, no. 10, pp. 4075-4084, 2024 - AEM
Improved Prediction for Nonlinear Thermal History of Mg Alloy Subjected to Multiple ElectropulsesAdvanced Engineering Materials, vol. 26, no. 21, pp. 2400575, 2024 - KSTP-TMP
Hot Deformation Behavior of S355NL Steel Based on Dynamic Material ModelTransactions of Materials Processing, vol. 33, no. 5, pp. 348-353, 2024 - KSTP-TMP
Thermal Gradient Change of T-shaped Mg Alloy Specimen Exposed to ElectropulsesTransactions of Materials Processing, vol. 33, no. 4, pp. 285-290, 2024 - JMRT
Electropulsing anisotropy of cold-rolled Grade 2 titanium sheet: Effect of electric current direction on recrystallization and hardnessJournal of Materials Research and Technology, vol. 31, pp. 2249-2256, 2024 - MMI
Exploiting Electropulses to Optimize Microstructure in Ti–6Al–4V Fabricated by Selective Laser MeltingMetals and Materials International, vol. 30, no. 4, pp. 886-894, 2024 - MMI
Effect of Substituting Y with Gd on LPSO Phase Dispersion and Mechanical Properties of Mg-2Ni-2Y AlloyMetals and Materials International, vol. 30, no. 3, pp. 618-628, 2024 - JMRT
Effect of the initial texture of AZ31 Mg alloys on their microstructure and texture evolution during single pulse laser shock peeningJournal of Materials Research and Technology, vol. 29, pp. 1813-1823, 2024 - ISIJ Int.
Grain Refinement Effect on Resistance to Hydrogen-assisted Crack Growth in Equiatomic CoCrFeNi High-entropy Alloy with Different H Charging ConditionsISIJ International, vol. 64, no. 4, pp. 688-695, 2024 - JMA
Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentationJournal of Magnesium and Alloys, vol. 12, no. 1, pp. 186-196, 2024 - JMRT
Mechanical property of the shape memorable Ti–Zr–Nb–Sn alloy manufactured by in-situ alloying in directed energy depositionJournal of Materials Research and Technology, vol. 28, pp. 11-21, 2024
2023
- JMRT
Enhanced kinetics of microstructural evolution in Ti–6Al–4V through electropulsing treatmentJournal of Materials Research and Technology, vol. 26, pp. 8500-8508, 2023 - JMRT
Anisotropic microstructural evolutions of extruded ZK60 Mg alloy subjected to electropulsing treatmentJournal of Materials Research and Technology, vol. 26, pp. 3322-3331, 2023 - KJMM
Effect of Oxygen Content on Microstructure and Mechanical Properties of Additive Manufactured Ti-6Al-4VKorean Journal of Metals and Materials, vol. 61, no. 9, pp. 714-720, 2023 - JALCOM
Effect of interlayer cooling on the microstructure and mechanical properties of titanium alloys fabricated using directed energy depositionJournal of Alloys and Compounds, vol. 953, pp. 170202, 2023 - KSTP-TMP
Prediction of Cryogenic- and Room-Temperature Deformation Behavior of Rolled Titanium using Machine LearningTransactions of Materials Processing, vol. 32, no. 2, pp. 74-80, 2023 - Elast. Compos.
Optimizing interlayer cooling for SUS316L thin wall fabricated by directed energy depositionElastomers and Composites, vol. 58, no. 1, pp. 44-56, 2023 - JMRT
Effect of printing parameters on the microstructure and mechanical properties of SUS316L manufactured by DEDJournal of Materials Research and Technology, vol. 23, pp. 5239-5245, 2023 - Acta Mater.
Twinning-induced Plasticity Mechanism of α”-martensitic Titanium AlloyActa Materialia, vol. 248, pp. 118763, 2023 - JMRT
Gaussian process regression-based Bayesian optimization of the insulation-coating process for Fe–Si alloy sheetsJournal of Materials Research and Technology, vol. 22, pp. 3294-3301, 2023 - JALCOM
Microstructures and mechanical behavior of Ti-(38+x)Ni-12Cu (at%) (x=0∼3) alloysJournal of Alloys and Compounds, vol. 938, pp. 168664, 2023 - JALCOM
Precipitation of metastable intermetallic phases and nanoindentation behaviors of a Ti-20Zr-9Nb-4Sn (at%) alloy during aging treatmentJournal of Alloys and Compounds, vol. 933, pp. 167762, 2023 - JMEP
Heterogeneous-structured Ti-6Al-4V with enhanced mechanical properties in monotonic and cyclic deformation modesJournal of Materials Engineering and Performance, vol. 32, pp. 1966-1973, 2023 - JMRT
Fabricating Efficient and Biocompatible Filament for Material Extrusion-Based Low-Cost Additive Manufacturing: A Case Study with SteelJournal of Materials Research and Technology, vol. 22, pp. 181-191, 2023
2022
- Metals
Investigation of Collision Toughness and Energy Distribution for Hot Press Forming Center Pillar Applied with Combination Techniques of Patchwork and Partial Softening Using Side Crash SimulationMetals, vol. 12, no. 11, 2022 - JMA
Improvement in tensile strength of extruded Mg–5Bi alloy through addition of Sn and its underlying strengthening mechanismsJournal of Magnesium and Alloys, vol. 10, no. 11, pp. 3100-3112, 2022 - Appl. Sci.
Predicting the Effect of Processing Parameters on Caliber-Rolled Mg Alloys through Machine LearningApplied Sciences, vol. 12, no. 20, 2022 - MMI
Effect on Zn on Microstructures and Mechanical Properties of Mg–Gd–Y–Zn LPSO AlloysMetals and Materials International, vol. 28, no. 11, pp. 2613-2620, 2022 - Heliyon
Enhanced processing map of Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si aided by extreme gradient boostingHeliyon, vol. 8, no. 10, pp. e10991, 2022 - KJMM
Enhancing mechanical properties of Mg-Gd-Y-Zn alloys via microalloying with Ce and LaKorean Journal of Metals and Materials, vol. 60, no. 9, pp. 654-667, 2022 - MSEA
Low-cycle fatigue behavior and surface treatment of a twinning-induced plasticity high-entropy alloyMaterials Science and Engineering: A, vol. 853, pp. 143724, 2022 - JALCOM
Towards bone-like elastic modulus in TiNbSn alloys with large recovery strain for biomedical applicationsJournal of Alloys and Compounds, vol. 925, pp. 166724, 2022 - Addi. Manuf.
Transformation-induced plasticity in the heterogeneous microstructured Ti-Zr-Nb-Sn alloy via in-situ alloying with directed energy depositionAdditive Manufacturing, vol. 58, pp. 102990, 2022 - KSTP-TMP
Predicting Deformation Behavior of Additively Manufactured Ti-6Al-4V Based on XGB and LGBMTransactions of Materials Processing, vol. 31, no. 4, pp. 173-178, 2022 - MSEA
Improvement in the superelasticity of a Ti–35.5Ni–15Cu (at.%) alloy using Ti(Ni,Cu)2 phaseMaterials Science and Engineering: A, vol. 847, pp. 143346, 2022 - MSEA
Tuning the texture characteristics and superelastic behaviors of Ti–Zr–Nb–Sn shape memory alloys by varying Nb contentMaterials Science and Engineering: A, vol. 845, pp. 143243, 2022 - J. Appl. Polym. Sci.
Polyvinyl pyrrolidone (PVP) as an efficient and biocompatible binder for metal alloy processing: A case study with Ti-20Zr-11Nb-3SnJournal of Applied Polymer Science, vol. 139, no. 25, pp. e52396, 2022 - MMI
Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy DepositionMetals and Materials International, vol. 28, no. 1, pp. 197-204, 2022 - JMST
Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloyJournal of Materials Science & Technology, vol. 115, pp. 115-128, 2022 - JALCOM
Microstructure, transformation behavior and superelasticity of an aged Ti-40Ni-12Cu (at%) shape memory alloyJournal of Alloys and Compounds, vol. 900, pp. 163390, 2022
2021
- Sens. Actuators A
Phosphorescence-based temperature and tactile multi-functional flexible sensing skinSensors and Actuators A: Physical, vol. 332, pp. 113205, 2021 - JMRT
Accelerated recrystallization behavior of commercially pure titanium subjected to an alternating-current electropulseJournal of Materials Research and Technology, vol. 15, pp. 5706-5711, 2021 - MSEA
Microstructural evolution and mechanical properties of nanocrystalline Fe–Mn–Al–C steel processed by high-pressure torsionMaterials Science and Engineering: A, vol. 827, pp. 142073, 2021 - JMRT
Effect of type-C liquid metal embrittlement on mechanical properties of spot-welded TRIP steelJournal of Materials Research and Technology, vol. 13, pp. 2482-2490, 2021 - Meas. Sci. Technol.
Simultaneous measurement of two-dimensional temperature and strain fields based on thermographic phosphor and digital image correlationMeasurement Science and Technology, vol. 32, no. 9, pp. 095204, 2021 - ACS APM
Phosphorescence-Based Flexible and Transparent Optical Temperature-Sensing Skin Capable of Operating in Extreme EnvironmentsACS Applied Polymer Materials, vol. 3, no. 5, pp. 2461-2469, 2021 - JMRT
Accelerating globularization in additively manufactured Ti-6Al-4V by exploiting martensitic lathsJournal of Materials Research and Technology, vol. 12, pp. 304-315, 2021 - IJAMT
Manufacturing of a corrugated double-layered tube for the high-performance compact heat exchangerThe International Journal of Advanced Manufacturing Technology, vol. 112, pp. 2065-2080, 2021 - STWJ
Effect of Type-B liquid metal embrittlement cracks on high-cycle fatigue properties of spot-welded 1180 TRIP steelScience and Technology of Welding and Joining, vol. 26, no. 2, pp. 173-179, 2021 - Metals
Effects of Substitution of Y with Yb and Ce on the Microstructures and Mechanical Properties of Mg88.5Zn5Y6.5Metals, vol. 11, no. 1, 2021
2020
- JMSE
Application of Support Vector Regression and Genetic Algorithm to Reduce Web Warping in Flexible Roll-Forming ProcessJournal of Manufacturing Science and Engineering, vol. 143, no. 3, 2020 - JMA
Effect of heat treatment on LPSO morphology and mechanical properties of Mg–Zn–Y–Gd alloysJournal of Magnesium and Alloys, vol. 8, no. 4, pp. 1120-1127, 2020 - Crystals
Graded Grain Structure to Improve Hydrogen-Embrittlement Resistance of TWIP SteelCrystals, vol. 10, no. 11, 2020 - Crystals
Microstructural Influence on Stretch Flangeability of Ferrite–Martensite Dual-Phase SteelsCrystals, vol. 10, no. 11, 2020 - Appl. Sci.
Constitutive Analysis of the Anisotropic Flow Behavior of Commercially Pure TitaniumApplied Sciences, vol. 10, no. 22, 2020 - Addi. Manuf.
Microforming of fine metallic rods by the selective laser melting of powderAdditive Manufacturing, vol. 36, pp. 101612, 2020 - Appl. Sci.
Variation in Mechanical Properties of Ti-13Nb-13Zr Depending on Annealing TemperatureApplied Sciences, vol. 10, no. 21, 2020 - J. Manuf. Process.
High-strength bolt manufactured by an extrusion-based forming process using twinning-induced plasticity steelJournal of Manufacturing Processes, vol. 59, pp. 33-42, 2020 - Metals
Microstructural Evolution of Multi-Pass Caliber-Rolled Mg–Sn and Mg–Sn–Mn AlloysMetals, vol. 10, no. 9, 2020 - JMRT
Underwater surface remelting of selective laser melted titanium partsJournal of Materials Research and Technology, vol. 9, no. 5, pp. 10447-10458, 2020 - Crystals
- Sci. Rep.
Effect of undissolved Nb carbides on mechanical properties of hydrogen-precharged tempered martensitic steelScientific Reports, vol. 10, no. 1, pp. 11704, 2020 - KJMM
Prediction of Electropulse-Induced Nonlinear Temperature Variation of Mg Alloy Based on Machine LearningKorean Journal of Metals and Materials, vol. 58, no. 6, pp. 413-422, 2020 - JMRT
Fabrication of porous titanium parts by powder bed fusion of Ti–TiH2 blended powderJournal of Materials Research and Technology, vol. 9, no. 3, pp. 3026-3037, 2020 - MSEA
Plastic anisotropy of multi-pass caliber-rolled Mg alloy with split texture distributionMaterials Science and Engineering: A, vol. 788, pp. 139496, 2020 - Metals
Ambivalent Role of Annealing in Tensile Properties of Step-Rolled Ti-6Al-4V with Ultrafine-Grained StructureMetals, vol. 10, no. 5, pp. 684, 2020 - JMA
Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealingJournal of Magnesium and Alloys, vol. 8, no. 1, pp. 163-171, 2020 - Mater. Lett.
Deep-learning approach to predict a severe plastic anisotropy of caliber-rolled Mg alloyMaterials Letters, vol. 269, pp. 127652, 2020 - JALCOM
Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applicationsJournal of Alloys and Compounds, vol. 828, pp. 154401, 2020 - Steel Res. Int.
Prediction of Tempcore Rebar Strength Using a Thermomechanical Simulator with a Designed Hollow SpecimenSteel Research International, vol. 91, no. 1, pp. 1900520, 2020 - MMI
Orientation Dependence on Plastic Flow Behavior of Hydrogen-Precharged Micropillars of High-Mn SteelMetals and Materials International, vol. 26, no. 11, pp. 1741-1748, 2020
2019
- Mater. Trans.
Ultrasonic Reflection Characteristics of Wrinkle in Sheet Metal Forming —Evaluation by FDTD Analysis and Ultrasonic Measurement Using Model Specimen—Materials Transactions, vol. 60, no. 6, pp. 997-1003, 2019 - IJRMHM
Fabrication of long tubular parts made of tungsten-heavy alloys by inductive bonding of multiple tubesInternational Journal of Refractory Metals and Hard Materials, vol. 85, pp. 105058, 2019 - JMA
Improved tensile properties of AZ31 Mg alloy subjected to various caliber-rolling strainsJournal of Magnesium and Alloys, vol. 7, no. 3, pp. 381-387, 2019 - Appl. Sci.
Tempcore Process Simulator to Analyze Microstructural Evolution of Quenched and Tempered RebarApplied Sciences, vol. 9, no. 14, pp. 2938, 2019 - JALCOM
Enhanced yield symmetry and strength-ductility balance of caliber-rolled Mg–6Zn-0.5Zr with ultrafine-grained structure and bulk dimensionJournal of Alloys and Compounds, vol. 803, pp. 434-441, 2019 - Sci. Rep.
Comparative study on the effects of Cr, V, and Mo carbides for hydrogen-embrittlement resistance of tempered martensitic steelScientific Reports, vol. 9, no. 1, pp. 5219, 2019 - MMI
High-Strength AZ91 Alloy Fabricated by Rapidly Solidified Flaky Powder Metallurgy and Hot ExtrusionMetals and Materials International, vol. 25, no. 2, pp. 372-380, 2019 - Mater. Lett.
Sinter-joining of Cu54Zr22Ti18Ni6 BMG powder to Cu powder by spark plasma sinteringMaterials Letters, vol. 242, pp. 55-57, 2019 - AEM
Enhancing Superplasticity of Ultrafine-Grained Ti–6Al–4V without Imposing Severe Plastic DeformationAdvanced Engineering Materials, vol. 21, no. 1, pp. 1800115, 2019 - MSEA
Improved cold-rollability of duplex lightweight steels utilizing deformation-induced ferritic transformationMaterials Science and Engineering: A, vol. 742, pp. 835-841, 2019 - Mater. Lett.
High strain-rate superplasticity of AZ91 alloy achieved by rapidly solidified flaky powder metallurgyMaterials Letters, vol. 234, pp. 245-248, 2019
2018
- MSEA
Effects of carbon content on the tensile and fatigue properties in hydrogen-charged Fe-17Mn-xC steels: The opposing trendsMaterials Science and Engineering: A, vol. 724, pp. 469-476, 2018 - JSTP
Ultrasonic Reflection Characteristics of Wrinkle in Sheet Metal FormingJournal of the Japan Society for Technology of Plasticity, vol. 59, no. 687, pp. 47-52, 2018 - MMI
Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile propertiesMetals and Materials International, vol. 24, no. 1, pp. 187-194, 2018
2017
- MMI
Effects of drawing strain and post-annealing conditions on microstructural evolution and tensile properties of medium- and high-carbon steelsMetals and Materials International, vol. 23, no. 6, pp. 1176-1187, 2017 - KJMM
Enhanced Resistance to Delayed Cracking in Deep-drawn Lean Duplex Stainless Steel: the Role of Residual StressKorean Journal of Metals and Materials, vol. 55, no. 8, pp. 544-549, 2017 - MSEA
Increased resistance to hydrogen embrittlement in high-strength steels composed of granular bainiteMaterials Science and Engineering: A, vol. 700, pp. 473-480, 2017 - IJP
Constitutive analysis of electrically-assisted tensile deformation of CP-Ti based on non-uniform thermal expansion, plastic softening and dynamic strain agingInternational Journal of Plasticity, vol. 94, pp. 44-56, 2017 - MSEA
Effect of the amount and temperature of prestrain on tensile and low-cycle fatigue properties of Fe-17Mn-0.5C TRIP/TWIP steelMaterials Science and Engineering: A, vol. 696, pp. 493-502, 2017 - IJESE
Study on Molding Properties of Obsidian PerliteInternational Journal of Earth Sciences and Engineering, vol. 10, no. 2, pp. 358-360, 2017 - IJESE
Development of New Apparatus to Evaluate Ultrasonic Reflection Characteristic for Wrinkling in Press FormingInternational Journal of Earth Sciences and Engineering, vol. 10, no. 2, pp. 170-174, 2017 - STWJ
Brazing method to join a novel Cu54Ni6Zr22Ti18 bulk metallic glass to carbon steelScience and Technology of Welding and Joining, vol. 22, no. 8, pp. 714-718, 2017 - JMNM
Interface Characterization of Al–Cu Microlaminates Fabricated By Electrically Assisted Roll BondingJournal of Micro and Nano-Manufacturing, vol. 5, no. 3, pp. 031001, 2017
2016
- MSEA
Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steelsMaterials Science and Engineering: A, vol. 677, pp. 421-430, 2016 - MMI
Role of deformation twins in static recrystallization kinetics of high-purity alpha titaniumMetals and Materials International, vol. 22, no. 6, pp. 1041-1048, 2016 - J. Manuf. Process.
Anisotropic properties of directed energy deposition (DED)-processed Ti–6Al–4VJournal of Manufacturing Processes, vol. 24, pp. 397-405, 2016 - MMI
Effects of vanadium carbides on hydrogen embrittlement of tempered martensitic steelMetals and Materials International, vol. 22, no. 3, pp. 364-372, 2016
2015
- MSEA
Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti-13Nb-13ZrMaterials Science and Engineering: A, vol. 648, pp. 359-366, 2015 - MMI
Superior bonding properties of dissimilar steel joint produced by electroslag remeltingMetals and Materials International, vol. 21, no. 6, pp. 1054-1060, 2015 - Corr. Rev.
Role of Mo/V carbides in hydrogen embrittlement of tempered martensitic steelCorrosion Reviews, vol. 33, no. 6, pp. 433, 2015 - Int. J. Nanomedicine
Tribological and corrosion behaviors of warm- and hot-rolled Ti-13Nb-13Zr alloys in simulated body fluid conditionsInternational Journal of Nanomedicine, vol. 10, pp. 207-212, 2015 - IJHE
Role of Cu on hydrogen embrittlement behavior in Fe-Mn-C-Cu TWIP steelInternational Journal of Hydrogen Energy, vol. 40, no. 23, pp. 7409-7419, 2015 - Metals
Manufacturing Ultrafine-Grained Ti-6Al-4V Bulk Rod Using Multi-Pass Caliber-RollingMetals, vol. 5, no. 2, pp. 777-789, 2015 - ACS AMI
Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental ApplicationsACS Applied Materials & Interfaces, vol. 7, no. 18, pp. 9598-9607, 2015 - MMI
Phase transformation and its effect on mechanical characteristics in warm-deformed Ti-29Nb-13Ta-4.6Zr alloyMetals and Materials International, vol. 21, no. 1, pp. 202-207, 2015
2014
- MSEA
Enhancing yield strength by suppressing detwinning in a rolled Mg-3Al-1Zn alloy with {10-12} twinsMaterials Science and Engineering: A, vol. 619, pp. 328-333, 2014 - MMI
Integrated constitutive model for flow behavior of pure Titanium considering interstitial solute concentrationMetals and Materials International, vol. 20, no. 6, pp. 1017-1025, 2014 - Mater. Des.
Space-holder effect on designing pore structure and determining mechanical properties in porous titaniumMaterials & Design, vol. 57, pp. 712-718, 2014
2013
- Scr. Mater.
Microstructure tailoring to enhance strength and ductility in Ti-13Nb-13Zr for biomedical applicationsScripta Materialia, vol. 69, no. 11-12, pp. 785-788, 2013 - Mater. Des.
Grain refinement effect on cryogenic tensile ductility in a Fe-Mn-C twinning-induced plasticity steelMaterials & Design, vol. 49, pp. 234-241, 2013 - MMTA
Effects of Tungsten Addition on the Microstructure and Mechanical Properties of Microalloyed Forging SteelsMetallurgical and Materials Transactions A, in press, 2013 - MSEA
Internal-variable analysis of high-temperature deformation behavior of Ti-6Al-4V: A comparative study of the strain-rate-jump and load-relaxation testsMaterials Science and Engineering: A, vol. 562, pp. 180-189, 2013
2012
- MMI
Mechanisms of tensile improvement in caliber-rolled high-carbon steelMetals and Materials International, vol. 18, no. 3, pp. 391-396, 2012 - Mater. Lett.
Tensile deformation behavior of Fe-Mn-C TWIP steel with ultrafine elongated grain structureMaterials Letters, vol. 75, pp. 169-171, 2012
2011
- MSEA
Work hardening associated with epsilon-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steelsMaterials Science and Engineering: A, vol. 528, no. 24, pp. 7310-7316, 2011 - MSEA
Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbidesMaterials Science and Engineering: A, vol. 528, no. 21, pp. 6558-6564, 2011
2010
- MMI
The effect of porosity on the elasticity of pure titanium: An atomistic simulationMetals and Materials International, vol. 16, no. 3, pp. 421-425, 2010